Home

Services

Product design
Rapid Prototypes

CNC prototypes
Rapid Prototyping
Stereolithography Apparatus (SLA)
Selective Laser Sintering (SLS)
Fused Deposition Modeling (FDM)
Laminated Object Manufacturing (LOM)

Custom molds - plastic molds

Injection molds
Blow molds
Compression molds
Extrusion molds
Other custom molds

Plastic molding

Injection molding
Blow molding
Compression molding
Extrusion Molding

Production tooling

Portfolio

Successful Products

Electronic Products
Home Appliances
Sports Accessories

Rapid Prototyping Prototypes

SLA Prototypes
CNC Prototypes
LOM Prototypes
SLS Prototypes
FDM Prototypes

Custom molds - Plastic molds

Injection molds
Blow Molds
Compression Molds
Extrusion Molds
Other Custom Molds

Workflow

Communication Requirements
Product Design contract

Appearance Design
Configuration Design

Rapid prototyping prototype Creation
Custom molds
Production tooling - manufacturing

213. Three-dimensional ink-jet printing

DSPC The process is this: First, the work in the machine table covered with a layer of alumina powder, and an tiny silicone spray along the workpiece profile in the outer layer of powder on it. Silica alumina powder fixed in the current layer, and provide the next layer of alumina powder adhesive layer. After each layer, a layer table to drop the height, so that the next layer of powder and cement to re-apply. On the model without cement powder to accumulate in the cavity and around the model, plays a supporting role. The entire model is completed, the cavity filled by the powder should be avoided.

The principle of rapid prototyping technology: first out of the computer design into three-dimensional solid model data model data layer films. Rapid prototyping machine based on these data, the use of specific material, a thin layer of a thin layer to create a solid, paste each layer are bonded to a thin layer on the front, until the completion of the entities created.

Configuration used as the material properties vary, rapid prototyping machine used the principle in the structure is also different. Reported in the current RP seen dozens of technical process, but only the more mature four or five. Three-dimensional ink-jet printing is one of them.