Home>Glossary

1) For plastic mold problems in the point, if it is being produced by mold, plunger and hole with the tight, you can let loose with a little bit, as long as the burr can not fly; if it is vertical hole not only to avoid the empty hole behind the big thing; if it is a new mold is acceptance of the proposed problems in a timely manner back to the mold manufacturer repair, or may give you a great deal of follow-up to production problems.

2) For the production of such a problem, the maintenance of the plastic mold is very important to regular maintenance of the mold, clean the debris on the push rod, the normal production of mold cooling water must be connected in time.

When production mold mandrel can not be reset, be sure to confirm that you can identify the cause of the mold before they can mold, it will easily lead to mold damage, looking after problems related to the technical staff, in order to reduce losses minimum.