Home

Services

Product design
Rapid Prototypes

CNC prototypes
Rapid Prototyping
Stereolithography Apparatus (SLA)
Selective Laser Sintering (SLS)
Fused Deposition Modeling (FDM)
Laminated Object Manufacturing (LOM)

Custom molds - plastic molds

Injection molds
Blow molds
Compression molds
Extrusion molds
Other custom molds

Plastic molding

Injection molding
Blow molding
Compression molding
Extrusion Molding

Production tooling

Portfolio

Successful Products

Electronic Products
Home Appliances
Sports Accessories

Rapid Prototyping Prototypes

SLA Prototypes
CNC Prototypes
LOM Prototypes
SLS Prototypes
FDM Prototypes

Custom molds - Plastic molds

Injection molds
Blow Molds
Compression Molds
Extrusion Molds
Other Custom Molds

Workflow

Communication Requirements
Product Design contract

Appearance Design
Configuration Design

Rapid prototyping prototype Creation
Custom molds
Production tooling - manufacturing

228. Making a spray formed rapid tooling

Making a spray formed rapid prototyping includes the steps of making a model of a desired tool and constructing a ceramic pattern as the inverse of the model. The method also includes the steps of heating the ceramic pattern and thermally spraying a metal material against the ceramic pattern to form a desired tool.

It is known to make a spray formed rapid tooling. In spray forming, a master model of a desired tool is produced using a free form fabrication technique. This master model is then used to create a ceramic pattern, which is the reverse of the desired tool to be produced. The resulting ceramic pattern is the receptor onto which metal is sprayed to form a deposit in the shape of the desired tool.

Typically, the spray forming process uses a wire-arc spraying. In wire-arc spraying, electric current is carried by two electrically conductive, consumable wires with an electric arc forming between the wire tips. A high-velocity gas jet blowing from behind the consumable wires strips away the molten metal, which continuously forms as the wires are melted by the electric arc. The high-velocity gas jet breaks up or atomizes the molten metal into finer particles in order to create a fine distribution of molten metal droplets. The atomizing gas then accelerates the droplets away from the wire tips to the ceramic pattern where the molten metal droplets impact the ceramic pattern to incrementally form a deposit in the shape of the desired tool. The completed desired tool is then mounted and used to produce parts in conventional stamping, die casting, or molding process.