Home>Popular Page

Electrochemical plating in the plastic molds are a significant application is in the mold on the surface of your thin uniform layer of gold alloy to circumvent the processing regarding PVC or PVDC is released in the release of hydrochloric acid solution, corrosion pits shall be produced products surface drag marks, wrinkles and various defects, and will shorten the life span of mold. It really is generally side because of the electrochemical plating deposited to the surface in that mold 2.5"m thick platinum alloy. This layer regarding metal coating to circumvent erosion of PVC is actually released, thus greatly improving the life span of mold. Electrochemical plating employing gold alloy another advantage is the fact that, when the fix coating, do not start the mold might be repaired. For the finished surface typically work with iron or aluminum wire brush which has a soft brush in to the mold surface is not smooth like, to create the new coating with the entire mold surface blend together.

When that molding PET, WASHBOARD ABS, PE, PP cheap products, these products are steel in addition to chrome adhesion. In the gold alloy layer, which can enhance the material with that plastic surface in the separation of the role in the mold cavity? So long as the thickness in the gold alloy developing PVC to most the thickness required to meet the conditions of anti-adhesion.

Used after the expiry regarding plastic molds, corrode and corrosion usually for modeling perform surface, smear essential oil or grease. If you wish to remove the rust to the surface of that mold, usually left in the mold surface rust pits and dirt. Plastic mold because of this defect is normally fatal. By electrochemical plating, before saving that mold surface might be coated with any layer separated because of the thickness of that plating compartment 40m. Plated once, if necessary, might be combined with essential oil or grease layer, for corrosion, 12m thickness in the plated enough. When you'll want to use the mold might be separated to get rid of, so that that molds forming face into the initial state.