| Address: | PDS Enterprise Inc. 1650 West Artesia Blvd, Suite 278 Gardena, CA90248 |
| Phone: | 1-843-408-0142 |
| Email: | pdsenterprise@gmail.com sales@coolprototyping.com |
 |
|
Home>Glossary
257. Recycled plastics industry
1. Recycled materials - scrap plastic molding processing of waste plastics or other sources, after appropriate treatment and to again lower quality products for the manufacture of the materials.2. Recycled plastic - to recycled materials for the substrate of plastic.
3. Outlet material - refers to the production of injection products generated in the process flow, the corner formed by substandard products and waste.
4. Head material - refers to the production of extrusion products, materials or leakage during the transitional material injection molding machine was empty and clean when the chamber material.
5. Vice licensing materials - plastic raw materials in the synthesis process because change grades or varieties of performance resulting from failure of the plastic material parts
6. Submerged material - refers to the proportion of greater than 1 gram / cubic centimeter of material. This especially is filled with mineral plastic materials (polyolefin filled).
7. Floating material - refers to the proportion of less than 1 gram / cubic centimeter of material. This especially does not contain mineral-filled plastic material (polyolefin)
8. Expected to spend - refers to the complex multi-color material.
9. Milling material - the plastic waste through the plastic mill powder obtained after grinding material.
10. Granulation material - plastic materials produced by granulation plant granular plastic material. Granulation plant with different grain shape are not the same, there are domed, cylindrical, square and so on.
11. Scrap - plastic molding products processing operations, in addition to all other materials. Such as burrs, sprue Warts, Warts shunt, overflow edge parison more than expected, waste and so on. Scrap can be recycled thermoplastics, and thermosetting plastics scrap can not be reused.
12. Regrind (recycled material) - also known as crushed recycled materials. In injection molding, blow molding and extrusion molding material flow generated, gate materials, products, flash and nonconforming product and other materials and waste.
13. Spring materials - renewable materials industry commonly known as thermoplastic elastomer, the role is to increase the toughness of recycled materials. Some places also called "ground bounce."
14. Dead material - not heated plastics material. Generally refers to the cross-linking thermoplastic off. Some places also called "raw material."
15. Melt Index (MI) - thermoplastic resin at a certain temperature and load, its melt within 10 minutes of quality values through the standard capillary, in grams / 10 minutes said. Is that the molten thermoplastic resin, a measure of liquidity. The greater the value, the better the flow of melting, but the tensile strength decreased.
16. Ring material - generally refers to the ABS, PS and other miscellaneous metal sound material.
17. Baba materials - that replace the filter when cleaning down the waste contains more impurities.
18. Bubble materials - plastic pellets through the mechanism of plastic into pellets.
19. A material - material from the intake, head materials, scrap and other grinding or granulating the resulting material.
20. Resin - usually soften when heated or melting range, softening, tendency to flow under the external force at room temperature is a solid, semi-solid such as solid polymer or false. Sometimes can be a liquid polymer. In the plastic industry, broadly refers to any polymer as a plastic substrate.
Here are some samples we have done before, please kindly take a look:
Electronic product
design samples
rapid prototype
samples
Plastic molds
samples
Product design
Product design
samples
Product design
samples
Rapid prototyping
rapid prototyping
samples
rapid prototyping
samples
Plastic molds
Custom molds
samples
Custom molds
samples
Electronic product
design samples
rapid prototype
samples
Plastic molds
samples
We are constantly looking for new products in order to grow our business and Invention Home has enabled us to streamline that process much more quickly. Marsha Dunmyre
CA, U.S.A
BROWSE MORE
Cool Prototyping provides "one-stop" product design service: rapid prototyping, plastic molds, custom molds, production tooling and plastic molding.
Cool Prototyping Copyright 2008-2009 © All Rights Reserved. Rapid Prototyping
Cool Prototyping Copyright 2008-2009 © All Rights Reserved. Rapid Prototyping