| Address: | PDS Enterprise Inc. 1650 West Artesia Blvd, Suite 278 Gardena, CA90248 |
| Phone: | 1-843-408-0142 |
| Email: | pdsenterprise@gmail.com sales@coolprototyping.com |
 |
|
Home>Glossary
254. Silicone rubber membrane production steps
Using rapid prototyping technology to design and manufacture of products made of silicone rubber membrane as follows:A, based on solid modeling, the correct choice parting line to ensure the smooth mold release products, in the parting line of the tape and coated with color to show partitions.
B, samples from the mother of four to enclose the plate of the mold box combinations.
C, calculate the required dose of silica the main agent, the main agent and curing agent ratio of 10 to 1 uniformly mixed into the vacuum casting machine vacuum deaeration.
D, remove the silicone rubber into the mold box until the sample is completely surrounded by the mother.
E, the silicone rubber into the air again when the band into the vacuum injection in the deaeration.
F, about 24 hours at room temperature silicone rubber can be fully cured, fully cured when the required 35 degrees Celsius for 10 hours. To make use of room temperature hardening, hardening heat shrink silicone rubber will cause.
G, remove the frame to the silicon rubber mold with a scalpel cut open, remove the mother sample.
H, partly for holes in the mold. If you find a small amount of mold defects can be configured with a new silicone rubber patch, and after curing can be.
Here are some samples we have done before, please kindly take a look:
Electronic product
design samples
rapid prototype
samples
Plastic molds
samples
Product design
Product design
samples
Product design
samples
Rapid prototyping
rapid prototyping
samples
rapid prototyping
samples
Plastic molds
Custom molds
samples
Custom molds
samples
Electronic product
design samples
rapid prototype
samples
Plastic molds
samples
We are constantly looking for new products in order to grow our business and Invention Home has enabled us to streamline that process much more quickly. Marsha Dunmyre
CA, U.S.A
BROWSE MORE
Cool Prototyping provides "one-stop" product design service: rapid prototyping, plastic molds, custom molds, production tooling and plastic molding.
Cool Prototyping Copyright 2008-2009 © All Rights Reserved. Rapid Prototyping
Cool Prototyping Copyright 2008-2009 © All Rights Reserved. Rapid Prototyping