Home  |  Services  |  Workflow  |  Portfolio  |  Testimonial  |  Download  |  About Us  |  Contact Us  |  FAQ  |  Glossary 

Home>FAQ

174. Use and maintenance of printing mold common sense

Many people ask about the maintenance of the plastic mold, most people think that it will not matter as long as a little attention, it is not. Printing life of the mold tested to scratch brush ten thousand times the theoretical value, according to the degree wall scraper quality, and durable paint life decisions sand composition. Into a mold pattern may be at least 5-10 continuous construction to the wall home improvement projects. The average cost be 0.05 yuan per square. Printing mold maintenance is the objective factors to determine their life to Rococo Group production of liquid paint wallpaper in the aqueous coating composition, containing the main filling material is resin, a resin glue had been installed additional components, after and coalescents interaction, quickly cured film in the wall, so use the end of the printing die directly for immediate washing with water and with a soft cloth to wipe off paint film adhesion. And pay attention to check the mesh holes in control whether the light blockage, and if blocked, the construction of the project appear in the next paint can not penetrate, the phenomenon of pattern can not be formed. After blocking the printing mold can be gently wipe clean use of alcohol, whether soft or hard mode mode, in the cleaning process, avoid excessive force, rubbing, or cleaning with a hard brush, can easily lead to mold photographic printing, plastic shed or gauze to crack, causing printing die scrap.

Transport and storage:
Die during transport, printing paper Paper to be sealed to prevent the backlog caused during transportation of products gauze crack, deformation or aluminum, generally have above factors, the mold can only be discarded printing. Soft mode transport, the application of the newspaper and good, and the gap on the hard mode network box office, usually stored cool place to be standing in the shade.

Here are some samples we have done before, please kindly take a look:

Product design

Product design
samples
Rapid prototyping

rapid prototyping
samples

Plastic molds
Custom molds
samples


Electronic product
design samples



rapid prototype
samples



Plastic molds
samples
Home - FAQ - FAQ174
We are constantly looking for new products in order to grow our business and Invention Home has enabled us to streamline that process much more quickly.
                                                    Marsha Dunmyre
                                                          CA, U.S.A
BROWSE MORE
Cool Prototyping provides "one-stop" product design service: rapid prototyping, plastic molds, custom molds, production tooling and plastic molding.
Cool Prototyping Copyright 2008-2009 © All Rights Reserved. Rapid Prototyping